德國Huber    www.huber-china.com.cn  www.huber-online.com
Peter Huber Kältemaschinenbau 公司是由Peter Huber先生在1968年創立的最有實力的制冷設備制造企業， 于1984年成為有限責任公司，公司的所有權歸Huber家族所有。Huber公司目前擁有220 多名職員， 其中有8 名制冷技術專家?，F(xiàn)在有12萬臺Huber公司生產的控溫設備在全球運轉，產品廣泛應用于化工 、制藥及實驗室等技術領域。
自公司成立以來，Huber以其技術的獨特創新成為控溫技術的市場領導者。1989年Huber推出了全新的高動態的控溫系統Unistat系列， 2010年 Huber公司再次榮獲德國創新百強企業獎，成為德國最具創新的百強中型企業之一。
Huber公始建于1968年。
Huber公司有33年生產制冷設備的經驗，22年生產應用plug &play技術的控制器，11年的生產umistat系列產品的經驗。
Huber公司的公司理念是不斷培訓新工程師，技工和藝工。
Huber公司的的各個部門都非常重視內部員工的培訓。
從1968年起，Huber公司負責培訓了60個以上的制冷技術人員，如果計算電子工程師，CAD操作者和辦公室人員，培訓的人員遠遠多于60個。
現在有5萬臺Huber設備在全球運轉，70%的產品出口。
1986Huber為德國Heidolph公司設計的旋轉蒸發儀專用L型冷卻循環器“Kotostat”獲得“Dr-Kudocf-Eberle-”獎。
1992年Huber推出“unistat和Tango”系列新技術；而Unistat系列產品很快成為工業行業的市場領導者。

發明創新回顧
1976年，Huber的先驅者體積小和功能強大的控溫設備，ministat和unistatcc問世。
1979年，把pluy&play”技術和不銹鋼殼體引入控制器最大化的靈活，高效。
1981年，首次生產出“intelligent chillet”。
1986年，生產出旋轉蒸發僅專用L型冷卻循環器，Kotostat獲“Kudolf Ebetle”發明獎。
1991年，首次使用無-CFC的制冷劑。
1992年，unistat tango問世，全封閉的液體循環系統，內循環體積小，高效的溫度響應。
1994年，首先使用無HCFC制冷劑，比法定的時間提前6年。
1994年，Compatible Control CCC系列問世，擴展了“plug和play”的技術。
1994年，首次生產出世界上第一臺氣冷和水冷型循環油浴CC245，夏天用水冷，冬天用氣冷。
1998年，Polystats 新的比較簡單的Polystats系列產品投放市場。
2000年，Dus-tnetm 唯一的一種為unistat系列產品的導熱油DW-tnerm問世，溫度范圍為—90℃200℃。 
2001年， unistatCC400 可以到400的高溫循環油浴產生。
2002年，Unichillers問世，體積小，功率大，制冷功率可以從0.6KW到100KW。
2003年，生產“coolnet”分檔次電動機控制膨脹閥。
2003年，將應用“pluy&play”技術的polystat系列的控制器應用于Huber的除unistat之外的所有儀器。

HUBER 中國北京辦事處
電話: 010-82376670 82370380 62315363 62315373 
傳真: 010-82376670-809 
手機: 13601001886 
www.huber-china.com.cn 
Email:csf@huber-china.com.cn 
聯系地址：北京市海淀區學清路9號匯智大廈A座1616室 
郵編100085
德國HUBER 上海代表處
地址:上海市中山北路3856弄2號中環大廈1325室 
郵編：200062 
電話：021－52682303，52682503 27384006 
傳真：021-52682503

Peter Huber Kältemaschinenbau, was established in 1968 by Peter Huber. Since 1984 it has been a limited company and is completely owned by the Huber Family.
Peter Huber had several reasons to celebrate during his jubilee year in 2001:
33 Years of Huber Refrigeration Machines
22 Years of controllers featuring "Plug & Play" Technology
11 Years of Unistats featuring Tango Technology
Training the next generation of engineers, technicians and craftsmen has always been a priority to the Huber company. A training program active in all departments of the factory boasts 24 indentured apprentices in several trades.
Starting in 1968, Peter Huber can state with pride that his company has been responsible for training over 60 refrigeration technicians through this program. This figure increases when we count electricians, CAD operators and office staff.
Today more than 60,000 Huber systems are in operation worldwide. 70% of our sales went to the export market.
In 1986 the company received the Dr.-Rudolf-Eberle-Award for the "Rotostat". Please use this link to read about the Rotostat and why Huber was honoured with this award.
1992 saw the launch of the Unistat and Tango Technology. The Unistat range has grown to dominate our industry and remains un-equalled. Please use this link to read more about it.
Every company has it's landmarks. Products and innovations that set it apart from their competitors. Some of these are listed below, others will follow as our engineers continue to react to the demands of the market place and the constraints of new regulations.
Please note that we use the word "First" only if we are sure that we were. If you know differently, please tell us and we will retract the claim.
 
Key innovations at a glance:
1976 Ministat and the Unistat cc set a Huber precedent for small and powerful thermostats. 
1979 The introduction of stainless steel casing and "Plug & Play" Technology introduced into the controllers. Maximum flexibility, minimum effort! 
1981 First automatic load matching re-circulating chillers "Intelligent Chillers". 
1985 Rotostat working platform for rotary evaporators wins the "Rudolf Eberle" Innovation Award. 
1991 First to convert to non-CFC refrigerants 
1992 Unistat Tango launched. First and still only hydraulically sealed circulator with low internal volume for highly responsive dynamic control. 
1994 First to convert to non-HCFC refrigerants, 6 years before the legal phase out. 
1994 Compatible Control (CC) Extension of the "Plug & Play" concept. 
1994 First air and water cooled bath circulator in the world, CC245. Water-cooled in the summer and air-cooled in the winter. 
1998 Polystats New range of simple units for low demand applications with "Plug & Play" Technology. 
2000 DW-Therm unique thermal fluid for Unistats. Temperature range of -90°C to 200°C 
2001 Unistat CC400 High Temperature circulator up to 400°C
2002 Unichiller extremely compact and powerful chillers with refrigeration power from 0,6kW to 100kW. 
2002 Production of "CoolNet" stepper motor controlled expansion valves. 
2003 Use of the Polystat controller featuring Plug & Play technology is extended to ALL Huber units except the Unistats.